Social networks Linked in Twitter
 .
 
exhibitors

AABC 2014. Exhibitors

A&D Technology, Inc. with Cincinnati Sub-Zero Products, Inc.
A&D Technology is your partner for all alternative energy testing and development needs. Our product portfolio includes battery cell and pack test automation and laboratory management systems, providing 24/7 unattended test cell operation, centralized data management and test cell monitoring. Best-in-class third-party components, such as programmable power supplies, environmental chambers and liquid coolant systems can be seamlessly integrated through the modular design and open system architecture. Simulation tools allow for substantially reduced development times. All these systems are already successfully used by automotive OEMs, Tier 1 suppliers, military and national laboratories, operating some of the largest battery test laboratories in the world. www.aanddtech.com
CSZ is a leading provider of environmental test chambers with over 73 years of industry experience.  We offer a large selection of standard and custom-designed chambers including temperature, humidity, altitude, thermal shock and combined temperature/humidity/vibrations chambers, HALT/HASS chambers and more. We offer extensive experience in chambers designed for testing NIMH, lead acid and lithium ion batteries from small battery cells to large battery packs. Chamber sizes range from small benchtop chambers to full environmental controlled rooms. Temperatures range from -73°C to +190°C with an optional humidity range as low as 10% to 95%. www.cszindustrial.com

 
 
Alcoa with Phinergy
Alcoa is the world’s leading producer of primary and fabricated aluminum, as well as the world’s largest miner of bauxite and refiner of alumina. In addition to inventing the modern-day aluminum industry, Alcoa innovation has been behind major milestones in the aerospace, automotive, packaging, building and construction, commercial transportation, consumer electronics and industrial markets over the past 125 years. Among the solutions Alcoa markets are flat-rolled products, hard alloy extrusions, and forgings, as well as Alcoa® wheels, fastening systems, precision and investment castings, and building systems in addition to its expertise in other light metals such as titanium and nickel-based super alloys. Sustainability is an integral part of Alcoa’s operating practices and the product design and engineering it provides to customers. Alcoa has been a member of the Dow Jones Sustainability Index for 12 consecutive years and approximately 75 percent of all of the aluminum ever produced since 1888 is still in active use today. Alcoa employs approximately 61,000 people in 30 countries across the world. For more information, visit www.alcoa.com, follow @Alcoa on Twitter at www.twitter.com/Alcoa and follow Alcoa on Facebook at www.facebook.com/Alcoa.
Phinergy is an innovative clean-tech company that develops and commercializes breakthrough metal-air technologies. Phinergy’s aluminum-air energy systems use air and water to unleash the vast energy stored in aluminum (8.1kWh/kg Al). These systems offer significant advantages over competing technologies, including high energy density, no CO2 emissions, fully recyclable materials, safety, and low cost. The company has demonstrated its technology on a fully electric vehicle — a dual architecture that combines a lithium-ion battery and an aluminum-air range extender. Phinergy is partnering with Alcoa to bring aluminum-air technology to market and provide a high-performance range extender solution for electric vehicles. For more information, visit www.phinergy.com.

 
 
AMETEK Fluoropolymer Products
AMETEK Fluoropolymer Products specializes in high purity and highly corrosion resistant products to serve the chemical processing, metalworking, semiconductor, power generation, aerospace, lead battery and other industrial applications. Its core products are based on Fluoropolymers and are marketed under the following trade names: Fluoropolymer Heat Exchangers and Fluoropolymer Tubing.
www.ametek.com.
 
 
Applied Spectra, Inc. (ASI)
Applied Spectra, Inc. (ASI) is a leading supplier of analytical instruments based on laser ablation technology. Our J200 LIBS (Laser Induced Breakdown Spectroscopy), LA (Laser Ablation), and Tandem LA – LIBS instrument offers rapid elemental and isotopic analysis without sample preparation. Our powerful analytical products help our customers in Li-ion battery industry to manufacture better Li-ion batteries by providing efficient QC of incoming raw materials and monitoring of battery component chemistry. Our instruments are accompanied by unrivaled technical support via our staff’s more than 80 years’ experience in LIBS and LA-ICP-MS analysis.
www.appliedspectra.com
 
 
Arbin Instruments
Arbin is the leading global supplier of multi-channeled potentiostat/galvanostat testing systems for every energy storage device application. This includes materials research, batteries, capacitors, x-EVs, flow batteries, fuel cells and humidifiers. We cover applications ranging from nano-amps up to thousands of amps. Arbin is a multi-million dollar corporation nestled in the heart of Texas with thousands of systems in operation in over 50 countries.
Our success is due to the advanced product features we provide and have often pioneered, the knowledge and service provided by our team, and the extraordinary goals established by management that place a strong emphasis on R&D. Arbin balances innovation and experience with the flexibility to always take on new challenges, and in recent years has partnered with fellow industry leaders for ARPA research projects. All of these aspects combined set us apart from competitors and drive our continued growth and improvement.
www.arbin.com

 
 
Argonne National Laboratory
Argonne is a multidisciplinary science and engineering research center, where “dream teams” of world-class researchers work alongside experts from industry, academia and other government laboratories to address vital national challenges in clean energy, environment, technology and national security.
www.anl.gov
 
 
Asahi Kasei E-materials Corporation
Asahi Kasei E-materials help make life more comfortable through leading-edge product development that enables us to offer our customers new value for the advancement of the energy and electronics industries.
Our separator, HIPORE™, is the key point for higher performance LIBs. While market growth continues in mainstream LIB applications for portable devices such as smartphones and tablet PCs, significant additional growth is forecasted in electric vehicle applications. As the world’s leading supplier of LIB separator, Asahi Kasei E-materials will continue to expand capacity in line with demand growth while advancing the global expansion of HIPORE™ operations to meet emerging customer needs.
www.asahi-kasei.co.jp
 
 
Bio-Logic Science Instruments USA
Bio-Logic Science Instruments is a global leader in instrumentation and accessories utilized for research and testing of energy storage devices (i.e. batteries, capacitors, fuel cells, solar cells, etc.). Bio-Logic pioneered the multi-channel potentiostat/galvanostat for battery research, and offers an exceptional price-to-performance range of both single-channel and modular multi-channel systems to address the most complicated research needs. Our EC-Lab interface provides a wide variety of battery specific techniques (GCPL, GITT, CLD, CPW, APGC, etc.), standard voltammetry techniques (CV, CA, CP, etc.), and ModuloBat, a free-form technique builder in an easy-to-use format for the most complicated test routines. Impedance spectroscopy available on every channel and capability to analyze anode and cathode simultaneously are just two of our numerous advantages. An all-new battery cycling system, the BCS-815, has been added to our expanding list of product offerings, providing up to 15A and impedance spectroscopy on every channel. For a complete listing of our systems and accessories to enhance your energy storage device laboratory, please visit www.bio-logic.net and our EC-Lab and BT-Lab lines, or call us at 865-769-3800.
 
 
Bitrode Corporation
Bitrode Corporation, a Sovema Company, is a leading manufacturer of battery charging and test equipment with over 50 years of experience in the battery industry. By collaborating with our customers to integrate their special requirements into our products, Bitrode is consistently able to meet the changing needs of a sophisticated market. We offer an extensive product line of formation and laboratory test equipment, user-friendly software and manufacturing automation tools appropriate to all battery applications and chemistries. Our focus on quality and a commitment to providing superior technical service and support drives us to be the best full-service manufacturer of formation charging and test equipment for both large and small cell markets.
www.bitrode.com
 
 
BTU International
BTU International is a leading global supplier of advanced thermal processing equipment and processes to the alternative energy and electronics assembly markets. BTU equipment and know-how are used in solar cell, nuclear fuel and fuel cell manufacturing as well as in the production of printed circuit board assemblies and semiconductor packaging. BTU controlled atmosphere furnaces are available with temperature ranges up to 1150°C and with various process atmospheres including hydrogen and nitrogen. Excellent atmosphere purity is achieved through the use of BTU’s patented gas barrier technology. In addition, BTU’s unique eductor technology can be used to enhance cooling or control process atmosphere. The end result is superior efficiency, superior performance, and superior thermal uniformity.
www.btu.com
 
 
Bühler, Inc.
Bühler is a global leader in the field of process engineering, especially the Grinding and Dispersion activity, specialist part of Bühler’s Advanced Materials Division. The company is offering lithium ion battery electrode slurry production plants in Europe and North America together with its cooperation partner PRIMIX Corporation, the Asian leader for LIB coatings slurry production equipment. With this collaboration, Bühler brings its market presence, plant engineering, integration and automation capabilities, test center, laboratory and customer service network and its own complementary activities in the field of LIB raw materials grinding.
www.buhlergroup.com
 
 
CD-adapco
CD-adapco is the world's largest independent CFD-focused provider of engineering simulation software, support and services. It has over 30 years of experience in delivering industrial strength engineering simulation to a wide range of industries and application.
www.cd-adapco.com

 
 
Charged Electric Vehicles Magazine
CHARGED Electric Vehicles Magazine is the acclaimed B2B EV Industry magazine and website dedicated to bringing the EV industry to primetime. Each issue features vehicle and company profiles, battery and technology news, big picture analysis – covering government, utilities, fleets, energy, and more. CHARGED is distributed to over 14,000 qualified subscribers and distributed at all of the leading EV industry events. International readers receive the popular digital edition, averaging over 78,000 page views per issue. CHARGED subscribers are key decision makers throughout the electric vehicle industry: from small start-ups to the biggest automakers, design firms to Tier One suppliers, fleet managers, energy suppliers, policy makers, government officials, and academia.
www.chargedevs.com
 
 
Daikin America, Inc.
Daikin is a world leader in the development, manufacture and sale of fluoropolymers, fluoroelastomers, fluorochemicals, and fluorocoatings. Headquartered in Osaka, Japan, Daikin is a leader in innovation, quality products and customer commitment.
With manufacturing, sales, and technical support located in 9 countries throughout the world and with over 36,000 employees, Daikin has a strong global foundation.
Fluoropolymers and chemicals have a wide range of unique properties and Daikin’s products are used virtually everywhere. Among the markets we service are aerospace, architecture, automotive, consumer cookware, energy storage, filtration, home goods, industry, medical, nonwovens, optics & displays, paper & packaging, oil & gas, renewable energy, semiconductor, textile & fabric treatments, wire & cable.
www.daikin-america.com
 
 
Digatron Power Electronics
More than hardware and software, formation process control and test data generation; Digatron Power Electronics is a solutions provider for the production, quality control and R&D of batteries, fuel cells, super-capacitors and other energy storage devices.  A premier worldwide company with over 200 employees is at your service from our four manufacturing and service locations including Germany, USA, China and India; we are here to assist clients with all its post-assembly needs.
  • Test equipment from cell to pack to system;
  • Production formation and conditioning equipment;
  • Systems engineering including plant layout, material handling, power management;
www.digatron.com

 
 
Exponent, Inc.
Exponent is a leading engineering and scientific consulting firm. Our multi-disciplinary organization of scientists, physicians, engineers, and regulatory consultants performs in-depth investigations in more than 90 technical disciplines. We analyze failures and accidents to determine their causes and to understand how to prevent them, and we evaluate complex human health and environmental issues to find cost-effective solutions. Our integrated approach offers a multifaceted perspective that le/images/aab/ads/ to insight, revelation, and innovative solutions that produce bottom-line results. www.exponent.com

 
 
Freudenberg Nonwovens L.P
Freudenberg is a family-owned group of companies active on the global stage. Its 16 Business Groups operate on various markets and in various sectors of industry.
Creativity, quality, diversity and innovative strength are the company’s cornerstones. Reliability and responsible conduct rank among the basic values of the company, which was founded over 160 years ago. Freudenberg is committed to partnerships with customers, and believes in a long-term orientation, financial solidity and the excellence of over 37,000 associates in 58 countries around the globe.
www.freudenberg-nw.com
 
 
HEL Group
HEL manufacture instruments for thermal hazard and calorimetry testing, including an adiabatic calorimeter (often generically called "ARC") for thermal runaway problems in batteries and battery packs. This instrument is widely used to determine limits on safe temperature as well as safe charging/discharging rates. The product – Battery Testing Calorimeter (BTC) – can be used for packs larger than 50cm (around 20 inches) as standard now while at the same time enabling small scale tests of battery components during research and development phases. This data under so-called "abuse" conditions is now almost mandatory. BTC can be linked with live video and thermal imaging technology, to provide unparalleled data on battery performance and hazards.
An isothermal version (iso-BTC) has now also been released which directly provides data for thermal management systems. For example under different charging/discharging rates, it will determine how much cooling is necessary to prevent runaway. The iso-BTC is suitable for single batteries and packs, regardless of size and shape.
HEL is a multinational company with headquarters in Europe (London) plus major technical sales and support offices in USA, India and China. For further information: www.hazards.co
 
 
Henkel Corporation
As a global leader in adhesives, sealants and surface treatment technologies, Henkel offers a complete portfolio of chemical technology for designing into cells, modules and packs. Solutions include conductive primer coatings, metal pretreatments, structural and elastic adhesives, sealants, potting compounds and materials and encapsulates.

In addition, Henkel has a broad array of noise, vibration and harshness (NVH) solutions to incorporate into module and pack design. Henkel’s material technologies can be tailored to meet specific customer needs.

For complete processing solutions for lithium ion, battery, supercapacitor and fuel cell applications, please visit www.henkelna.com/energystoragecczbffva or call 866-332-7024.



 
 
Hibar Systems Limited
Hibar Systems has provided exceptional equipment for the battery industry for over 30 years. Hibar is well known for precision dispensing pumps that are used for electrolytes, gels, sealants and wetting agents. For applications that require more than a dispensing pump Hibar offers a complete range of battery equipment. Hibar can provide lab scale filling and closing systems for cell development to a complete 600 part per minute production line.
We have extensive expertise with many cell chemistries in cell assembly, vacuum filling, closing methods, and battery packaging.
Contact us with your requirements and we can discuss the proper equipment for your application.
www.hibar.com

 
 
Horiba Scientific
HORIBA Scientific, world leader in spectroscopic instrumentation, specializes in Glow Discharge and Raman spectrometers and their application for analysis of Li Ion batteries. Key technologies include elemental depth profile of electrodes, simultaneous measurement of all elements, including Lithium, entire depth profile of electrodes in 10 minutes or less, and a patented device for transfer of air sensitive samples. Applications include studies of charge and discharge processes, process control and comparative studies. HORIBA also offers elemental analyzers, GD-OES Spectrometers, and products for Raman, steady-state and lifetime Fluorescence, Photoluminescence, XRF, spectroscopic ellipsometry, atomic emission spectroscopy, optical components, gratings and high performance CCDs.
www.horiba.com

 
 
IMG Saxony-Anhalt
IMG is the Investment and Marketing Group of the German federal state of Saxony-Anhalt. We support domestic and international companies through a full range of services from the beginning of a project idea to the business implementation in our region. In addition, IMG markets the business and science location Saxony-Anhalt both nationally and internationally. IMG is also responsible for the national and international tourism marketing. The state of Saxony-Anhalt is IMG's sole shareholder.
Saxony-Anhalt’s great potential has grown out of a distinguished history and has been developed with the passion and enthusiasm of the people who live and work here. Our federal state is characterized by verve and openness and the drive for innovation and exploration. High levels of reliability, flexibility and efficiency offer investors the perfect conditions to set up a business location. The wide range of educational opportunities, culture and leisure activities on offer make this an excellent place to reside.
www.invest-in-saxony-anhalt.com

 
 
JSR Micro, Inc.
JSR Micro, Inc. and JM Energy have created the ULTIMO lithium ion capacitor for superior energy and power. ULTIMO is available in both laminate and prismatic form factors. The key technology in ULTIMO is the pre-doping of the anode with lithium ions, which provides: Higher capacitance, higher voltage and higher energy density. Compared to a battery that stores electricity through slow chemical reactions, a capacitor makes it possible to charge and discharge electricity almost instantaneously with an extremely long cycle life. ULTIMO LIC cells are also available in modules. Our module line-up includes 4, 8, and 12 cell modules for prismatic and laminate cells. Master controllers are used for balance when five or more modules are used together. JSR’s aqueous binders for Lithium Ion Batteries offer significant improvements in safety, performance and manufacturing cost over traditional organic binders with superior adhesion, higher discharge rate and improved cycle life performance.
www.jsrmicro.be
 
 
Kemet Electronics Italia s.r.l.
Kemet Electronics Italia s.r.l., producers of Arcotronics machinery is a recognized leading supplier of lithium ion, lithium polymer, and supercapacitor cell assembly production equipment. Arcotronics’ machinery experience with lithium based technologies spans more than 25 years.  Support is available in engineering, development, and fabrication for six sigma based semiautomatic and automatic equipment in various cell shapes (cylindrical, prismatic spiral wound, and stacked) and sizes (Bluetooth, cell phone, laptop, and HEV/PHEV).  Processes supported include cell assembly, packaging, and electrolyte filling. The machinery company (US owned) is located in Sasso Marconi (Bologna - ITALY) with direct support locally in the regions of Europe, North America, Japan, Korea, China, India, and Singapore.
US Contact: johndispennette@kemet.com
EU Contact: fabrizionanni@kemet.com
www.kemet.com
 
 
Korea Battery Industry Association (KBIA)
The Korea Battery Industry Association is a government agency to raise public awareness of the battery industry as a single industrial entity and securing national competitiveness in the sector. Coex is Korea’s top venue for international convention & Exhibition providing more than 20 years of experience and knowhow in the MICE industry.
www.interbattery.or.kr
 
 
LS Mtron
LS Mtron want to grow into a company that provides Leading Solution and be a place where its employee can achieve their dreams. All employees of LS Mtron stand behind the vision of becoming ‘Innovative Technology Partner’ and are doing their best to make LS Mtron a ‘world-class company’.
LS Mtron will secure world-class core technologies and find and implement the most efficient solutions based on a market knowledge that can understand changes in the markets and in customers. We will lead our customers in order to grow into a global leader.
www.ultracapacitor.co.kr
 
 
Maccor, Inc.
Maccor Inc. was the pioneer, and is the world’s largest commercial manufacturer of automated test systems for a wide range of energy storage devices (i.e. batteries, capacitors, fuel cells, etc.) and device chemistries. In addition to standard cycling, drive cycle tests (i.e. FUDS, HPPC, US06 Drive Profile, etc.), sophisticated electrochemical experiments (i.e. cyclic voltametry, GITT Testing, PITT Testing, etc.), and high-speed pulse testing Maccor systems can perform impedance spectroscopy experiments in conjunction with a Solartron Analytical or Princeton Applied Research frequency response analyzer as well as temperature cycling experiments in conjunction with a Maccor temperature chamber. Then test systems can also be configured with optional SMB and CAN communication hardware to allow interfacing with battery BMS systems. Maccor also supplies cell formation equipment for a variety of cell formats and sizes. Today Maccor has over 1,700 systems in more than 50 countries with local sales and customer support services available in many areas.
www.maccor.com

 
 
Maxwell Technologies
Maxwell Technologies and its full line of industry-leading ultracapacitors have been the preferred energy storage and power delivery solution in more than a million products, in applications ranging from automotive, heavy transportation, renewable energy, backup power, wireless communications and industrial and consumer electronics.
www.maxwell.com
 
 
Midtronics, Inc.
Midtronics is a worldwide leader and provider of vehicle battery testing and management products and services. Founded in 1984, Midtronics remains singularly focused on battery management innovation. Midtronics holds a significant portfolio of patents and other intellectual property that are at the heart of new products and technologies for effective battery management. The company is committed to continue advancing the standard in its industry, supplying customers with custom battery management solutions that meet evolving needs, including those related to hybrid, electric and other new vehicle systems.
For more information, visit www.midtronics.com/transportation.
Twitter: @Midtronics
 
 
National Alliance for Advanced Technology Batteries
The National Alliance for Advanced Technology Batteries (NAATBatt) is a trade association whose members consist of advanced battery manufacturers, supply chain partners, and end users dedicated to promoting the development of advanced battery technology and the manufacture of advanced battery systems. NAATBatt promotes the commercial interest of our members by supporting developments in the science of and market for advanced electrochemical energy storage technology not only in the United States, but also Worldwide, consistent with the goals of enhancing energy efficiency, reducing petroleum dependence, and enabling carbon-free electricity generation.
www.naatbatt.org
 
 
NETZSCH Instruments N.A., LLC
NETZSCH develops and manufactures a complete high-precision instrument line for thermal analysis and thermophysical properties measurement while also offering commercial testing services in their laboratories. The instrumentation is employed for research and quality control in the polymer sector, the chemical industry, the areas of inorganics and building materials, and environmental analysis. The company’s technology and quality standards make them to one of the world's leading manufacturers in their business. The Analyzing & Testing business unit was created in 1962 and employs more than 400 people around the world. For more information, please visit www.netzsch-thermal-analysis.com
 
 
NETZSCH Premier Technologies, LLC
NETZSCH specializes in machinery for grinding and dispersion of powders, especially for use in battery manufacturing; we have been an innovative technology leader in batch and continuous process equipment for wet and dry grinding and dispersion; lab size to complete custom engineered systems with capacities up to 65 tons per hour. Production of mixing and dispersion equipment: high speed dispersers, inline mixing, horizontal and vertical media mills, multi-shaft mixers, powder size reduction equipment (jet mills, classifier mills, universal mills), skid-mounted, turn-key processes, custom equipment and systems.
www.netzsch-grinding.com

 
 
Packaging Technologies & Inspection (PTI)
PTI Inspection Systems manufactures non-destructive testing technologies that provide a unique solution for assuring integrity and quality of high capacity automotive batteries. PTI’s Seal-Scan® Inspection Technology has proven to be a reliable and effective method to inspect high capacity battery packs non-destructively to verify seal and package integrity. Seal-Scan is a unique air-coupled ultrasound technology that inspects the bonding of package seal materials, detecting channel defects and weak seals. PTI’s VeriPac inspection systems deploys a high vacuum pressure decay technology to detect micro leaks, cracks and pinholes in battery cell walls.
PTI Inspection Systems is the leading manufacturer of non-destructive package inspection technologies for the pharmaceutical, medical device, food and container industries. We offer inspection systems for package integrity testing, seal integrity and leak testing. Our technologies exclude subjectivity from package testing, and use test methods that conform to ASTM standards. PTI Inspection systems provide repeatable, reliable results and can be incorporated into protocols at any point in the manufacturing process as they are non-destructive, non-invasive and require no sample preparation.
www.ptiusa.com

 
 
PEC North America, Inc.
PEC delivers the building blocks for the development and manufacturing of large format cells, modules and battery packs for automotive, aerospace and defense applications.
PEC’s offerings include R&D test equipment and automated cell finishing lines automating all process steps after the electrolyte filling (soaking, formation, grading, degassing, ageing, stand loss, sorting…).
Contact: www.peccorp.com
 
 
PyroPhobic Systems Ltd.
PyroPhobic Systems Ltd. is a material science company with unique, proprietary intumescent, fire resistant, thermoplastic technologies that are injection molded into UL tested fire barrier components that stop the spread of fire and thermal energy. IntuPlas was recently tested at an independent laboratory and proven effective as a lithium ion cobalt battery thermal runaway fire containment system. IntuPlas is available for integration with Electric vehicle fire resistant battery packs, as a lithium ion battery bulk cargo transportation container and as a lithium battery storage system. IntuPlas significantly reduces risk from a run away lithium ion battery fire as it intumesces to absorb thermal energy, and contains events to a single cell, thereby preventing catastrophic loss.
www.pyrophobic.com
 
 
Rogers Corporation
From ultra-thin protection for sensitive electronics to robust gasketing for automotive applications, Rogers Corporation’s PORON® Urethane and BISCO® Silicone materials are engineered for performance. Both material options offer excellent compression set resistance for long-term performance in a variety of markets. Available in multiple formulations, PORON Urethane and BISCO Silicone technologies provide innovative solutions for lighter, stronger, more flexible and more reliable applications.
www.rogerscorp.com
 
 
Saft America, Inc.
Saft is a world leader in the design and manufacture of advanced technology batteries for industry. The Group is the world’s leading manufacturer of nickel batteries and primary lithium batteries for the industrial infrastructure and processes, transportation, civil and military electronics’ markets. Saft is the world leader in space and defense batteries with its Li-ion technologies which are also being deployed in the energy storage, transportation and telecommunication markets. Saft’s 4,000 employees present in 18 countries, together with its 15 manufacturing sites and extensive sales network, all contribute to accelerating the Group’s growth for the future. For more information, visit Saft at www.saftbatteries.com.
 
 
Shmuel De-Leon Energy, Ltd.
        
Shmuel De-Leon Energy Ltd. is a leading company in the field of power sources knowledge.
The company provides comprehensive collection of power sources knowledge tools and services:
  • Market research reports
  • Batteries , Fuel cells and EV seminars and conferences
  • Batteries, FC & EV Weekly newsletter
  • Energy Sources On-Line web DataBase (batteries, fuel cells, capacitors and more...)
  • Power sources solutions
  • Representing Energy Storage testing and research equipment companies in Israel
Contact Details:
Shmuel De-Leon Energy Ltd.
10 Mazal Arie st., Hod-Hasharon 45309, Israel
Homepage: www.sdle.co.il, www.batteriesdatabase.com
E-mail: shmuel@sdle.co.il
Tel/Fax: +972-77-5010792

 
 
TDK-Lambda Americas, Inc.
TDK-Lambda Americas High Power Division is a manufacturer of Programmable, High Density Power Supplies located in Neptune, N.J.. TDK-Lambda Genesys™ Series of Programmable Power Supplies has the highest density, making the Genesys™ Series the most complete set of platforms with identical user interfaces. Platforms include 750W, 1500W, 3.3/5kW and 10/15kW Output. Outputs available range up to 600V and 1,000A. In addition to saving space, GenesysTM power supplies contain extensive standard features that provide a new level of performance and flexibility. Also now available, an optional LXI Certified LAN interface provides flexible system integration and functionality.
www.us.tdk-lambda.com
 
 
The Battery Show
The Battery Show 2014 will return to Novi, MI, USA on September 16-18, and will co-locate with Electric & Hybrid Vehicle Technology Expo for the second year, bringing the entire supply chain under one roof. Together, these shows create the largest event in North America for the battery and electric & hybrid vehicle industries. The show is supported the industry leading magazine Electric & Hybrid Vehicle Technology International, sent twice a year to over 30,000* key specifiers and decision-makers throughout the global OE automotive industry.
www.thebatteryshow.com
 
 
Thermal Hazard Technology
Thermal Hazard Technology, a world leader in battery calorimetry and heat measurement, has a product range to meet the evolving requirements of the EV lithium battery market. As well as the Accelerating Rate Calorimeter (ARC) for battery components and small cell testing, latest products include:
  • EV+ Accelerating Rate Calorimeter (EV+ ARC) for worst case abuse testing of EV lithium battery cells.
  • Isothermal Battery Calorimeter (IBC) for accurate heat generation measurement and heat capacity of lithium batteries for a range of sizes from coin cell to large prismatic.

www.thtusa.com  


 
 
ThyssenKrupp System Engineering GmbH
ThyssenKrupp System Engineering is applying its extensive experience in the automotive industry on electrical drive trains for hybrid and electrical vehicles. The product range includes lines for the manufacture of Li-ion cells and for the assembly of module and battery packs, turnkey assembly systems for electric motors and end-of-line testing solutions.
www.thyssenkrupp-systemengineering.com
 
 
Tosoh Corporation
Tosoh is a global chemical company that supplies manufacturers with the materials they need to produce the things that make modern life all that it is and everything it can be. Since its founding in1935, Tosoh has expanded into high-value-added businesses such as organic chemicals, bioscience, quartz ware and advanced electronic materials.
www.tosoh.com
 
 
Total Battery Consulting, Inc.
Total Battery Consulting (TBC), provides consultations on a wide range of technical and business matters. TBC’s client list includes over 150 firms - major automakers and automotive system integrators, startup and established battery and material producers, government agencies, and investment firms. Dr. Menahem Anderman, TBC president—known for his unique technological depth and business aptitude— specializes in providing technology and market assessments.
The xEV Industry Insider Report, is based on Dr. Anderman’s on-site interviews with senior battery technologists and business development executives at 15 global automakers and 25 of their current and prospective battery suppliers. Updated in December 2013, it includes a detailed assessment of current Li-Ion battery technology, including design, performance, durability, safety, and cost, and prospects for improvement.
www.totalbatteryconsulting.com
 
 
TÜV SÜD America, Inc.
TÜV SÜD AMERICA INC. is the global testing and certification source for advanced energy storage devices and systems. Whether your products are batteries, ultra-capacitors, electric vehicle components, or electric vehicle systems, our ISO 17025-accredited laboratories and experienced engineers can help develop, validate, and certify your products for global use. Life Cycle, abuse, durability, performance, environmental, electrical, and EMC testing can be performed on all types of cells, modules, or packs throughout our global network of testing laboratories and certification bodies. For our full range of battery services visit www.tuvamerica.com

 
 
Umicore
Umicore is the world´s leading producer of active cathode material for rechargeable batteries. One in five Li-Ion batteries ever build contains Umicore cathode materials and more than 20 xEV platforms are powered by Umicore. For years Umicore has been at the center of an industry revolution, leading to longer mobile phone usage, increased laptop efficiency and more miles from a single charge on electrical vehicles. Our unique closed loop approach ensures best -of-class batteries; from the moment they are designed till the moment they have to be recycled.
www.umicore.com
 
 
Unico, Inc.
Unico provides innovative DC power solutions for industry. We pioneered the first high-power electronic DC servo drives back in 1967. From the earliest stages of automotive HEV development, Unico has supplied DC power solutions for battery simulation and testing. With the ability to have “stand alone” DC supplies or share power with a dynamometer for EV applications, Unico le/images/aab/ads/ the industry in versatility. Our systems are fully customizable to meet the needs of the customer.
www.unicous.com
 
 
United Chemi-Con, Inc.
United Chemi-Con, a wholly owned subsidiary of Nippon Chemi-Con, was established in the United States in 1970. The company is the largest manufacturer and supplier of aluminum electrolytic capacitors in North America, with more than 8,000 unique products available.
United Chemi-Con is headquartered in Rosemont, Illinois, with manufacturing and warehouse facilities located in Brea, California and Lansing, North Carolina. This, combined with our sales, service and field engineering support throughout the country, ensure customers are met with a superior level of customer service.
To suit the industry’s ever-changing needs, United Chemi-Con is continuously developing and introducing an array of new products. Additionally, our environmental policy ensures environmental allegiance in all areas of operation: yesterday, today and tomorrow.
www.chemi-con.com
 
 
Wildcat Discovery Technologies
Wildcat Discovery Technologies (Wildcat) uses proprietary high throughput technology to accelerate battery R&D. This massively parallel technique enables our scientists to investigate hundreds of materials in the time standard laboratories look at a handful. As a result, Wildcat’s customers reduce R&D costs and get products to market faster. Wildcat’s unique method involves the synthesis of materials in bulk form and the evaluation of those materials in individual batteries, thousands every week. New cathodes, anodes, electrolytes, binders, additives, synthetic methods and formulations are all possible. Whether your goal is near term cell optimization or longer term breakthrough material discoveries, Wildcat is ready to help get your new cell technology to market… F-A-S-T!
www.wildcatdiscovery.com.
 
 
ZEON CORPORATION
Selection of binder systems utilized on anodes and cathodes for Li-ion cells can directly influence to lower resistivity, higher capacity retention, longer cycle life, and the ability to withstand hot and cold temperatures. ZEON will being exhibiting its market-leading line of aqueous and NMP-based binders for Li-ion anode and cathodes as well as sealants.
www.zeon.co.jp