Social networksLinked inTwitter
poster sessions
Battery Developers – Materials Developers – Battery-System Integrators!

AABC 2012. Poster Presentations

PostersInterest was high during AABC 2012  poster sessions, which focused on the following topics:

• Lithium-Ion Battery Materials
• Lithium-Ion Cell Safety and Life
• Lithium-Ion Pack Technology
• Other Energy-Storage Systems





  1. Introduction to Dow Li-Ion Battery Materials: Performance, Value Proposition, and Commercialization Status of the Dow Coated Anode and Coated Cathode Materials
    Jamie Cohen, Dow Energy Materials
  2. New Cathode Materials for Li-Ion Batteries
    Isao Kabe, Showa Denko
  3. Nanohybrid Technology for Preparation of Progressive Lithium-Ion Battery Materials
    Shunzo Suematsu, Nippon Chemi-Con
  4. Carbon Conductive Additives and Current Collector Coating for Lithium-Ion Battery Electrodes
    Thomas Hucke, Timcal
  5. An All Carbon Nanotube Li-Ion Secondary Battery
    David Lashmore, Nanocomp Technologies
  6. Low-cost, High Capacity Si/xGnP® Graphene Lithium-Ion Battery Anode Material
    Rob Privette, XG Sciences
  7. The New Amorphous Carbon and Fine-Graphite for Anode Materials of LIB
    Akio Sakamoto, Toda Kogyo Corp.
  8. Dimensionally Stable Highly Porous Separators for Large Format Lithium-Ion Batteries
    Robert Waterhouse, Entek Membrames
  9. Temperature Dependency of Transport Properties of LiPF6 in EC:DEC
    Henrik Lundgren, KTH Royal Institute of Technology
  10. Development of the New Grade of Structure Controlled Micro Graphite (SCMG™)
    Yasuaki Wakizaka, Showa Denko
  11. High-Performance Overlithiated Layer Oxide (OLO) Cathode Battery
    Takahiro Endo, Samsung Yokohama Research Institute (SYRI)
  12. New High-Capacity Cathode Materials for Lithium-Ion Batteries
    Brian Barnett, TIAX
  13. EMES Viability for Lithium Ion Battery Electrolytes
    Deirdre Strand, Dow Chemical Co.
  1. Thermal Stability of Lithium Manganese Iron Phosphate
    Deirdre Strand, Dow Chemical Co.
  2. The Relationship of the Nail Penetration Test to Safety of Large Format Lithium-Ion Cells
    Suresh Sriramulu, TIAX
  3. Electronic and Chemical Contributions of the Solvent on High-Voltage Cathode /Electrolyte Interfaces using LiNi0.4Mn1.6O4 and Carbon Black Electrodes in Lithium Half Cell
    Mathieu Le Digabel, Commissariat à l'Energie Atomique
  4. Safe Li-Ion Technology for Micro and Mild Hybrid Application Based on CEA Bipolar LiFePO4/Li4Ti5O12 Technology
    Marianne Chami, Commissariat à l'Energie Atomique
  5. Dependence of Iithium-Ion Battery Lifetime on Temperature Using Manganese Oxide Spinel as Cathode Material
    Tomonobu Tsujikawa, NTT Facilities Inc.
  6. Estimation of Discharge Voltage Curves of Large Lithium-Ion Cells Under Discharge to Time-Varying Loads
    Toshio Matsushima, NTT Facilities Research Institute
  7. Lithium-Ion Battery Test Systems
    Paul Lunny, Moehwald Bosch Group
  8. Improved State-of-Health Determination for Automotive Lithium-Ion Batteries by Advanced Mathematical Methods
    Dave Andre, Deutsche ACCUmotive GmbH & Co.
  9. Making Lithium-Ion Abuse Tests Meaningful
    Erik Spek, TÜV SÜV Canada
  10. Model for the Functional Based Concept Evaluation of High-Voltage Lithium-Ion Battery Systems for Electric Vehicles in the Automotive Industry
    Markus Hackmann, P3 Group
  11. Forced Destruction System of Lithium-Ion Batteries in Pressure Tight Housing
    Yo Kobayashi, Central Research Institute of Electric Power Industry (CRIEPI)
  12. Fast Charging Method for Lithium Battery Based on Reduced Order Electrochemical Thermal Model
    Xueyan Li, Auburn University
  13. Modeling, Validation and Analysis of a Pouch Type High Power Lithium-Ion Battery Based on Electrochemical-Thermal-Mechanical Principles
    Song-Yul Choe, Auburn University
  14. Lithium-Ion Battery Model Development & Validation for HEV, PHEV & EV Applications
    Joseph McDonald, U.S. EPA - Office of Transportation and Air Quality
  15. Safe and Lifetime-Stable Leclanché Lithium-Ion Batteries
    Hilmi Buqa, Leclanché SA
  16. Process Optimisation by the Application of Round Cells (18650) and Pouch Cells with Reference Electrode
    Marcel Wilka, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)  
  17. Dispersion of Advanced Battery Materials Using a High-Speed, Thin-Film Mixer and its Impacts
    Tsumoru Ohata, Primix
  18. Battery Thermal Modeling Using State Space
    Xiao Hu, ANSYS
  19. Battery Material Quality Control for Improved Performance and Safety
    Sanjay Patel, Evans Analytical Group
  20. The French SIMCAL Research Network for Modelling of Energy Storage System Calendar Ageing in EVs and HEVs
    Arnaud Delaille, Commissariat à l'Energie Atomique
  21. Design for Safety
    Fredrik Larsson, Chalmers University of Technology
  22. Battery Research for Automotives at the Ångström Advanced Battery Centre in Sweden – How to Promote Safe, Low-Cost Batteries with a Long Life
    Fredrik Bjorefors, Uppsala University
  23. Batteries for Smart Grid Applications
    Malcolm J Shemmans, MJD, Inc.
  24. Safety Enhancement and High Voltage Performance Achieved Using Fluorinated Additives in Electrolyte
    Joseph Sunstrom, Daikin America
  1. The Four Cost Reduction Pillars every Battery Equipment Manufacturer and Cell/Pack Manufacturer Needs to Know
    James Jackson, Siemens
  2. Using a Passive PWM Pattern Balancing Method to Increase Safety in Large Multi-Cell Battery Packs
    Hannes Nordmann, RWTH Aachen University
  3. Vehicle Development, Integration, and Calibration
    Brian Purdy, FEV
  1. East Penn UltraBattery® Modules Incorporated into a 2010 Honda Civic Hybrid
    Scott McCaskey, East Penn Manufacturing
  2. New Developments in NiMH Technology
    Richard Howlett, Nilar
  3. A Better Cold Weather Battery for Arctic Environments
    Michael Golub, University Alaska Fairbanks
  4. Enhanced Performance in Electric Double-Layer Capacitors (EDLC) by Using Fluorinated Electrolytes
    Ron Hendershot, Daikin America
  5. Wildcat "EM1"
    Steven Kaye, Wildcat Discovery
  6. Scalable production of nano-scale complex metal oxides: Experience with LFP and HE-NMC
    Shelley Brown-Malker, Very Small Particle Co., Ltd.
  7. Safety and Performance Testing of Microporous Polymer Separators with Ceramic Additives and Non-woven Reinforcements
    Kirby Beard, Porous Power Technologies, LLC
  8. Complete 12V Automotive Electrical System using Lithium Ion Batteries
    John Santini, TDI Power