Social networksLinked inTwitter

AABC Europe 2015. Poster sessions

Battery Developers – Materials Developers – Battery-System Integrators!

AABC Europe 2015 featured the following poster presentations:
Lithium-Ion Cell Materials
Cell Design
Battery Management, Testing, and Simulation
Electrochemical Capacitors
Other Topics


Lithium-Ion Cell Materials

  1. Investigation of the Interaction of Separator Materials and Electrolyte Solvents for Li-Ion Batteries
    Andreas Hofmann, Karlsruher Institut für Technologie (KIT)
  2. Deterioration Analysis of the Si Anode with SBR Binder in Lithium-Ion Battery
    David Wallenus, JSR Micro
  3. Life Cycle Test and Resistance Characterization of Li-Ion Cells with Si-based Composite Anodes
    Jiahao Li, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)
  4. Water-Based Anodes and Cathodes for Lithium-Ion Batteries
    Margret Wohlfhart-Mehrens, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)
  5. Ultra-Fast Elemental Depth Profile of Positive and Negative Electrodes by Pulsed RF Glow Discharge Optical Emission Spectrometry
    Rainer Nehm, Horiba Scientific
  6. Metal Salts: Novel Electrolyte Additives for High-Voltage Lithium-Ion Batteries
    Ralf Wagner, Münster Electrochemical Energy Technology (MEET), Münster University
  7. New Insights into the Structure-Property Relationship of High-Voltage Electrolyte Additives for Lithium-Ion Batteries Using a pKa Value Approach
    Dennis Roman Gallus, Münster Electrochemical Energy Technology (MEET), Münster University
  8. Solid Glass-Ceramic Electrolytes for Advanced Lithium Batteries
    Miriam Kunze, Schott AG
  9. LIBS as a Chemical Diagnostic Tool of Lithium-Ion Battery Raw Materials and Fabricated Components
    Michael Colucci, Applied Spectra, Inc.
  10. New Materials for Enhancing Performance and Reducing Production Cost of Batteries
    Robin von Hagen, ALTANA AG

Cell Design  

  1. A Choice of Polymeric Binder for Li4Ti5O12 LIB Anode
    Eun-Suok Oh, University of Ulsan
  2. BATTERIKOURA - Granular Battery for Fast Mechanical Unloading and Loading
    Sergei Startchik, Batterikoura Project
  3. EV Battery Lifetime at Low Temperature
    Bjarne Johnsen, Danish Technological Institute
  4. Characterizing the Li-plating Behavior of a Lithium-Ion Cell Using the Cell Thickness Method
    Bernhard Bitzer, Daimler AG
  5. Investigation of Battery Cell Durability for Use in All-Electric Racing Cars
    Alexander Bauder, Deutsches Zentrum für Luft und Raumfahrt DLR
  6. The variety of Lithium-Ion Battery Designs in x-EV and their Impact on the Disassembly Process
    Nirugaa Natkunarajah, University of Siegen
  7. Design and Dimensioning of Modular, Hybrid Battery Systems for Automotive Applications
    Jan Becker, ISEA RWTH
  8. Process Control in Electrolyte Filling and Activation of Lithium-Ion Cells
    Michael Roscher, ThyssenKrupp System Engineering GmbH
  9. Surface Layer Formation in Li4Ti5O12|LiMn2O4 Battery Cells Investigated by XPS and NEXAFS
    Tim Nord, Uppsala University

Battery Management, Testing, and Simulation  

  1. The Influence of a Short-Term Thermal Stress on the Performance and the Characteristics of Lithium-Ion Cells
    Pamina Bohn, AUDI AG
  2. Development of In Situ Gas Measurements for Lithium-Ion Battery R&D
    Dee Strand, Wildcat Technologies
  3. About the Use of Calorimetry for Battery Safety Studies
    Ekkehard Füglein, NETZSCH-Gerätebau GmbH
  4. Real-time, High-accuracy SOC Estimation for Lithium-Ion Batteries
    Sae Takenaka, NTT Energy and Environment Systems Laboratories
  5. Vehicle Analysis and Power Net Modeling to Optimize the 12 V / 48 V Dual-Storage Architecture
    Christina Antonius, Johnson Controls Power Solutions EMEA

Electrochemical Capacitors  

  1. The study of Ionic-Liquid-Based Carbon-Carbon Supercapacitors
    Svetlana Menkin Bachbut, Elbit Systems
  2. Power Improvement of Hybrid Supercapacitors Based on Redox-Active Electrolytes by Using an Easily Synthesizable Reduced Graphene Oxide
    Silvia Roldán, CICEnergigune
  3. Electrolyte for Supercapacitors - The Effect of Impurities and Voltage Window Expansion
    Paul Vermeulen, Sachem
  4. Lithium-Ion Capacitor System in a Hybrid Bus Application
    Karel Fleurbaey, Vrije Universiteit Brussel
  5. Novel Hybrid Supercapacitor with Improved Energy Density
    Emanuele Gucciardi, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)

Other Topics  

  1. Calculation of Residual Values of Used Electric Vehicle Batteries for Stationary Second Life Applications
    Michael Danzer, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)
  2. Reverse Engineering – Calculation of Cost, Capacity, and Energy for Lithium-Ion Batteries
    Markus Hackmann, P3 Automotive GmbH
  3. Cost-Reduced and Environmentally Friendly Manufacturing of Lithium-Ion Batteries
    Mareike Wolter, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS
  4. Development of Innovative Lithium-Metal-Free Lithium-Ion Sulfur Battery for Renewable Energy, Electric Transport, and Electronics
    Aishuak Koranov, Nazarbayev University Research and Innovation System
  5. Research and Development of Modern Lead-Acid Batteries – Investigation on the Influence of Carbon Additives
    Victor Trapp, Fraunhofer Institute for Silicate Research
  6. Polymer-Enabled Li-Air Battery Systems
    Sam Kogan, Powermers, Inc.
  7. New Approach to Address Fundamental Challenges of Solid-State Batteries
    Henning Lorrmann, Fraunhofer-Institut für Silicatforschung ISC
  8. Refresh Charging in Stationary Energy-Storage Systems with VRLA and Flooded Lead-Acid Batteries
    Julia Badeda, ISA RWTH
  9. Optimal Channel Design for Minimizing Shunt Currents in All-Vanadium Redox Flow Batteries
    Sebastian König, Karlsruher Institut für Technologie (KIT)
  10. Longer-lasting, Safer Li-Ion Batteries: Smaller, More Powerful Capacitors with Glass-Sealed GTAS® Lid Systems
    Radim Dvorak, Schott AG